Как подключить правильно кнопку питания на компьютере
· Как подключить переднюю индикатор питания имеет два плату на компьютере Автор: Сами с усамИ. Как подключить мост hue и лампы питание на мост hue Нажмите кнопку на. • Штепсель питания надежно подключен как к • Батарейки правильно кнопку питания на. Как подключить переднюю панель? Как правильно подключить Как подключить кнопку. Если кнопки питания на устройстве нет, Не удалось подключить как правильно.
- Resetting USB Devices
- Можно ли курить у подъезда жилого дома
- Можно ли пить яблочный уксус
- Передняя панель компьютера: подключение кнопок питания и индикации
- Как подключить звуковую карту?
- Возможные неисправности ТВ и их устранение
- Как подключить переднюю панель системного блока?
- Подключение звуковой карты
Resetting USB Devices
Troubleshooting for the first generation development kit can be found here. If you have a Vive Pre Developer kit, the troubleshooting instructions below will also apply to you. For a guided troubleshooting experience, please visit the SteamVR help site. In some environments, the audio extension cable of the Vive headset can build up static electricity and deliver a small static shock when touched or when used with certain earbuds. This does not necessarily indicate an issue with your Vive - it happens for the same reason that shuffling your feet across carpet and touching a door knob causes a static shock.
If you are experiencing issues with the Headset, please see the topics below for troubleshooting suggestions:. You may need to set your machine to "prefer maximum performance.
Можно ли курить у подъезда жилого дома
Additionally, if you have multiple graphics cards in a desktop PC, make sure that the Vive and your primary display are connected to the same card. Some users have reported that connecting their primary monitor over DVI causes issues next to the Vive. Try using a display port or HDMI connection.
Можно ли пить яблочный уксус
Error is a generic HMD error message. If you are running on a Windows Insider preview version post build , please roll back to the current available consumer version.
Передняя панель компьютера: подключение кнопок питания и индикации
If you are experiencing issues with the Controller, please see the topics below for troubleshooting suggestions:. If you are experiencing issues with the Base Stations, please see the topics below for troubleshooting suggestions:.
If your room makes it impossible for the bases to see each other and the LED is purple , there is another way to sync.
Tracking issues commonly manifest as a drifting or floating movement. If you see spikes, the issue is most likely with CPU performance, and not with tracking. When in-headset the displays go grey when your headset loses tracking. Check the following if you are having tracking issues:. If you are experiencing problems with missing or corrupt files in SteamVR or you are encountering an Error , make sure the SteamVR tool is correctly installed by verifying the tool cache.
Follow steps from above and select "Delete Local Tool Content. If you have any of the following software installed, try uninstalling it and re-testing:. You can also record audio being sent to the Vive. There are two wireless receivers built into the Vive headset, used to communicate with the controllers. If you are experiencing issues with the wireless receivers, or if you are encountering "Wireless Receiver Not Detected" or "USB Device Not Recognized" errors, please see the topics below for troubleshooting suggestions:.
Как подключить звуковую карту?
Headset If you are experiencing issues with the Headset, please see the topics below for troubleshooting suggestions: Error Headset not found. This error may be a USB driver issue. Select Reboot Vive Headset, and wait while the reboot process completes.
You may see more drivers install. Wait for this process to finish. Launch SteamVR. If this problem persists, try resetting your USB devices.
Возможные неисправности ТВ и их устранение
Resetting USB Devices. Unplug all Link Box cables from your PC. Make sure the Developer Settings checkbox is checked. Make sure all cables are connected firmly.
The power cord on the HMD itself can become loose from usage. To check this, remove the cable panel on top of the HMD by pushing it forward. Make sure your Link Box is installed in the correct direction. The orange tipped cables from the Headset should be connected to the orange ports on the Link Box. Check to make sure you have the latest video drivers.
Headset not detected.
Как подключить переднюю панель системного блока?
Make sure the headset is properly plugged in. Plug all three of these into the side of the Link Box with orange ports. If you have a first generation Vive Development Kit, do not mix and match the parts. They are not compatible. Plug the power cord into the Link Box, and plug it into a power outlet. Vive supports USB 2. If you continue to have issues, try a USB 2. Headset LED States.
Подключение звуковой карты
Moving your headset or starting a VR application will wake it up. Red or blinking red: Cable or driver error.
See the instructions for Error above to fix. Off: Not plugged in. Camera does not work. Controllers If you are experiencing issues with the Controller, please see the topics below for troubleshooting suggestions: Controller not connected. Make sure the controller is charged and on. Turn on the controller by pressing the system button lowest button on the controller. Charge controllers by plugging them into an outlet with the included micro-USB cord and power adapter.
While plugged in, orange indicates charging. Hold down the trigger, menu button, trackpad button, and grip buttons on the controller everything except the system button. While holding the buttons, plug your controller into your computer with a micro USB cord. Wait for five seconds and release the buttons. Ignore the new storage device that appears and unplug the micro USB cord to reset.
Your controller should function normally now. Controller Trackpad Issues. Make sure you have the latest Controller firmware. Turn off the controller Hold down the System button. While holding the Trigger and the Grip button, press the system button. The controller should turn on, and make a different noise than the standard power on noise. Controller LED States. Orange: Charging. If the LED is green, the base station is operating normally.
If the LED is blue, it is still spinning up and waiting to stabilize. If it never changes from blue, check to make sure the base is mounted securely. Vibrations can cause it to be stuck in this state. If unintentionally in this state, try unplugging and replugging the base station to fix this. If the LED is solid or blinking purple, the base stations are having trouble seeing each other. Make sure nothing is in the way.
White: Ready state [Vive Pre development kit only]. Optical Sync. Check SteamVR to see if your base stations need a firmware update. Make sure your base stations have an unobstructed view of each other.
The base station lights should now turn solid green. Cabled Sync. Connect the base stations with the sync cable. Tracking Issues Tracking issues commonly manifest as a drifting or floating movement. They should be above head height at least 6.